Cheap doesn't have to mean bad, but it does force you to choose carefully where the cuts are. These are the entry-level options in the catalogue, ranked by our value-for-money score calculated from their specs.
Updated on 2026-09-16 · 6 modelos del catálogo analizados · manufacturer specs verified one by one
Illustrative scene of the workstation. Each model's image is a dimensioned drawing made with its real measurements.
Specs published by each manufacturer and verified one by one: the source and the date it was checked are on every product page. The drawings are scale diagrams made from those same measurements.
Adjustable lumbar, supports 120 kg and — years of warranty.
Mesh chair without headrest, with an S-shaped backrest and a padded, height-adjustable lumbar support. 53 cm wide seat with 6 cm foam and a seat height of 46 to 54 cm. Rocking from 90 to 105° and a maximum load of 120 kg.
Who it is for: Anyone looking for a basic mesh chair with adjustable lumbar for short days or a second workstation.
Adjustable lumbar, supports 150 kg and 5 years of warranty.
Mesh chair with 4D armrests, 2D headrest and lumbar support adjustable in height and depth. Seat from 46 to 56 cm, height-adjustable backrest and recline from 90 to 135°. It supports 150 kg and comes with a 5-year warranty.
Who it is for: Anyone who wants 4D armrests and two-axis adjustable lumbar without leaving the budget range.
Active lumbar, supports 136 kg and 3 years of warranty.
Full mesh chair with a dynamic lumbar support that adapts to your posture by itself and a wide headrest adjustable by 10 cm. Seat from 46.5 to 55.5 cm, backrest with three-angle lock and flip-up armrests. It supports 136 kg and cites EN 1335.
Who it is for: Anyone who wants adaptive lumbar with no knobs or levers, at a contained price.
Adjustable lumbar, supports 150 kg and 5 years of warranty.
High-back mesh chair with adjustable seat depth, a lumbar adjustment knob and a 3D synthetic-leather headrest. 2D flip-up armrests and a seat from 46 to 60 cm. Recline up to 135° and a load of 150 kg.
Who it is for: Anyone who wants adjustable seat depth and flip-up armrests to push the chair under the desk.
Fixed lumbar, supports 120 kg and — years of warranty.
Double-layer mesh chair with a built-in curved lumbar support and a headrest adjustable in height and angle. 50 × 50 cm seat with 8 cm foam and a height of 49 to 59 cm. Armrests flip up 90° and the load is 120 kg.
Who it is for: Tall people on a tight budget who need a seat that reaches 59 cm.
Fixed lumbar, supports 120 kg and — years of warranty.
Compact mesh chair with a built-in padded lumbar support and a 51 cm wide, 8 cm thick seat. Seat height from 47 to 57 cm and rocking from 90 to 105°. Flip-up armrests and a load of 120 kg.
Who it is for: Small spaces or secondary workstations where the chair has to fit under the desk.
Your popliteal height is around 25% of your total height and has to fall inside the range the manufacturer states. At 1.75 m that is about 44 cm: a chair with a 45 to 55 cm range is already too high for you, and no other spec fixes that.
02Lumbar support: fixed, adjustable or active
A fixed lumbar rarely lands where your curve wants it. Adjustable lets you set it at your height and forget it; active or self-adjusting follows you as you move and suits you better if you shift position a lot.
03Seat depth and armrests
Two or three fingers should fit between the edge of the seat and the back of your knee. And the armrests must drop far enough to leave your elbows at 90° over the desk: if they don't, the weight of your forearm lands on your trapezius.
04Maximum load and warranty
The load is a test limit, not a recommendation: leave 20% of margin. The warranty is the best clue to real durability, because it is what the manufacturer is willing to pay if it fails.
How we chose this list
We start from the specs each manufacturer publishes, not from opinions: height range, load, type of lumbar support, connection and warranty. Every figure is verified against its official source, with the date it was checked noted on the product page.
The order comes from the formula published in how we choose, the same for every product, with or without an affiliate programme. Each model's award is the objective criterion it leads on within this list. See the method.
What we don't do yet: physically test every model. When we do, we will say so and sign it. We also don't publish third-party ratings or review counts, because we cannot verify them.
Frequently asked questions
What do you give up in an entry-level chair?
Usually adjustable seat depth, 4D armrests and long warranties. Adjustable lumbar support is within reach in this bracket, and it's the first thing you should insist on.
Is a second-hand high-end chair worth it?
It's usually the best buy per euro spent if the model has spare parts available and you check the condition of the gas lift and the mechanism. Models like the Aeron or the Leap V2 are designed to last more than a decade.
A cheap chair now or wait for a better one?
If you sit for many hours, a cheap chair with adjustable lumbar today is better than a bad chair for a year. The chair filter tells you which ones cover your measurements within your budget.
This list comes from manufacturer specs and our public method. To tune it to your body, use the measurement filter.
